A stove that will not heat properly can disrupt an entire household or commercial kitchen. One plate may stop working, every plate may suddenly go cold, the hob may trip the electricity, or an electronic stove may switch on but refuse to respond to its controls.

We provide professional stove repairs in Durban for homes, apartments, rental properties, restaurants, guest houses, offices and other premises. We diagnose and repair electric stoves, built-in hobs, solid-plate stoves, ceramic cooktops, induction hobs and combination cooking appliances.

Our approach is straightforward: identify the actual fault, explain what has failed and determine whether repairing the stove is practical before replacing components unnecessarily.

If the problem involves the oven section of your appliance as well, see our dedicated Oven & Stove Repairs Durban service. For faults involving LPG burners, ignition or gas supply, visit Gas Stove Repairs Durban.

For stove repairs in Durban, call or WhatsApp 079 976 2941 and tell us what your stove is doing.

Stove Repair Specialists for Durban Homes and Businesses

Modern kitchens use several different types of cooking appliances, and the way they fail varies considerably.

A traditional solid-plate stove may stop heating because an element, selector switch or connection has failed. A ceramic hob may have a damaged heating zone or electronic control problem. An induction hob relies on power electronics, sensors and compatible cookware rather than conventional exposed heating elements.

Finding the correct repair therefore starts with understanding the appliance.

We work on faults affecting:

• Freestanding electric stoves

• Built-in electric hobs

• Solid-plate stoves

• Ceramic glass cooktops

• Induction hobs

• Combination stove and oven units

• Multi-zone electric cooktops

• Residential cooking appliances

• Selected commercial cooking equipment

If you are unsure what type of stove you have, send us a photograph of the appliance and its model label when booking.

Common Stove Problems We Repair in Durban

Some stove faults develop gradually while others happen without warning. These are among the problems customers commonly contact us about.

Stove Plate Not Heating

When one plate does not heat but the other plates work normally, the fault is often isolated to that cooking zone.

Possible causes include a failed heating element, damaged plate, loose connection, selector-switch problem or wiring fault.

A technician can test the affected circuit and determine whether the element is receiving power and whether the heating component itself has failed.

Replacing a plate without testing the supply circuit first can result in unnecessary parts being fitted when the real problem lies elsewhere.

All Stove Plates Not Working

If every plate stops heating at the same time, it is less likely that all heating elements failed simultaneously.

The problem may involve the power supply, isolator, terminal connection, internal wiring, control circuit or another component shared by the entire appliance.

We therefore check the overall electrical condition before replacing individual plates.

If other appliances in the kitchen are also without power, check your distribution board first. If the stove alone has failed, arrange an inspection.

Stove Trips the Electricity

A stove that repeatedly trips the breaker needs attention.

Electrical tripping can occur because of:

• Short circuits

• Damaged wiring

• Failing heating elements

• Moisture reaching electrical components

• Insulation breakdown

• Burnt terminals

• Internal component faults

The important clue is when the electricity trips.

If it trips immediately when the stove isolator is switched on, the diagnosis may be different from a stove that trips only when one particular plate is selected.

Tell us exactly what happens when booking. That information can narrow the fault significantly.

Do not repeatedly reset a breaker if the stove immediately trips it again.

Electric Stove Repairs Durban

Electric stoves remain common throughout Durban homes, flats, rental properties and commercial premises.

Although their design is relatively straightforward compared with some modern induction appliances, electrical stove faults still require proper testing.

We repair problems involving:

• Plates that do not heat

• Plates heating too slowly

• Plates overheating

• Heat that cannot be regulated

• Selector switches not working

• Burnt wiring

• Loose electrical terminals

• Stove indicator lights not working

• Stove tripping the DB board

• Power reaching the stove but no heat being produced

• Damaged controls

• Internal electrical faults

Where several components appear affected, we investigate whether they share the same electrical supply or control component before recommending replacements.

Solid Plate Stove Repairs

Traditional solid-plate stoves are durable, but the plates and their control components eventually wear.

One common symptom is a plate that remains completely cold. Another is a plate that only becomes slightly warm even when set to maximum.

Some plates develop visible cracking, distortion or corrosion, while others fail internally without obvious external damage.

Problems can also come from the selector switch rather than the plate itself.

For example, if a plate works only on certain settings or suddenly remains at full heat regardless of the knob position, the regulating component should be inspected.

We can test the heating circuit and determine whether the problem is the plate, control switch, wiring or another component.

Ceramic Hob Repairs Durban

Ceramic hobs provide a flat cooking surface with electrical heating elements underneath the glass.

When one cooking zone stops heating, the underlying element or its controls may have failed.

Other ceramic hob problems include:

• Cooking zone not heating

• Zone heating intermittently

• Zone remaining on full heat

• Touch controls not responding

• Error messages

• Hob switching off unexpectedly

• Electrical tripping

• Indicator light remaining on

• Damaged control electronics

• Cracked glass surface

A cracked ceramic surface requires particular attention because continued use may expose internal components to moisture and increase the risk of further damage.

If your ceramic hob glass is cracked, switch the appliance off and arrange an assessment rather than continuing to cook on the damaged surface.

Induction Hob Repairs Durban

Induction cooking systems operate differently from ordinary electric stoves.

Instead of heating an element that transfers heat through the cooktop, an induction hob generates an electromagnetic field that heats compatible cookware.

Because of this design, a hob that appears not to heat may not necessarily have a failed heating element.

Possible problems include cookware detection faults, temperature sensors, cooling-fan problems, electronic power modules, control boards or electrical supply issues.

Common induction hob complaints include:

• Hob switches on but does not heat

• One induction zone does not work

• Cookware is not detected

• Hob displays an error code

• Controls are unresponsive

• Unit switches off after a few seconds

• Cooling fan runs unusually

• Hob trips the breaker

• Several zones stop working simultaneously

When contacting us about an induction stove, send the brand, model number and any error code displayed on the control panel.

Do not repeatedly dismantle or reset an induction hob when it continues showing the same fault. The electronics inside can retain dangerous electrical energy even after the appliance has been disconnected.

Built-In Hob Repairs Durban

A built-in hob can make diagnosis slightly more complicated because parts of the appliance are installed within the kitchen worktop or cabinetry.

We assess the appliance before deciding how much access is required.

Faults may involve:

• Heating zones

• Switches

• Wiring

• Terminal blocks

• Control boards

• Touch panels

• Sensors

• Power connections

Where safe access requires the hob to be lifted from the worktop, this should be done carefully to avoid damaging the surrounding countertop or the appliance itself.

If you have a built-in hob, tell us when booking so the technician understands the installation before arriving.

Stove Plate Heating Too Slowly

A stove plate that still heats but takes much longer than before may be deteriorating rather than completely failed.

However, slow heating can also result from poor electrical connections, control faults or an issue with the power supplied to the plate.

Comparing different plates can provide a useful clue.

If three plates heat normally and one takes much longer to reach temperature, the problem is probably associated with that individual cooking zone.

If every plate has suddenly become weak, the technician should investigate a shared electrical or supply problem.

Stove Plate Will Not Switch Off

A plate that continues heating after the control is turned off should not be ignored.

The control switch or electronic regulating component may have failed in a closed position, continuing to provide power to the heating element.

Turn the stove off at its isolator or appropriate electrical supply if a heating zone remains energised unexpectedly.

Do not leave the appliance unattended while waiting to see whether it will eventually switch itself off.

This type of fault should be inspected before the stove is used again.

Stove Only Works on Maximum Heat

If a stove plate cannot maintain lower temperature settings and appears to operate only at full power, the regulating switch or electronic control may not be controlling the heating cycle correctly.

The problem can make normal cooking difficult and may lead to burnt food or unnecessary energy consumption.

We can test the associated controls and heating circuit to identify what is preventing proper temperature regulation.

Stove Knob Turning but Nothing Happens

A control knob can turn normally even when the component behind it has failed.

On mechanical stove controls, the shaft or selector mechanism can become damaged.

The knob itself can also crack internally and turn without properly rotating the switch.

Before assuming a major electrical failure, the control assembly should therefore be inspected.

Replacement requirements depend on the stove model and the condition of the switch behind the control panel.

Stove Switch or Selector Faults

Selector switches manage power to individual cooking zones on many electric stoves.

Over time, internal electrical contacts can deteriorate because of repeated switching and heat.

Symptoms of a failing stove switch may include:

• Plate working intermittently

• No heat from one plate

• Plate operating only at certain settings

• Heat continuing when switched off

• Crackling around the control

• Burning smell near the switches

• Discolouration around terminals

Electrical burning or overheating around a stove control should be addressed quickly before nearby wiring is damaged.

Burnt Stove Wires and Terminals

Cooking appliances operate at relatively high electrical loads.

Loose connections can generate heat at terminals, leading to discolouration, melted insulation or burnt wiring.

Sometimes the original problem starts with a loose terminal and eventually damages the switch, element or terminal block as well.

Simply replacing the visibly damaged component without correcting the poor connection can allow the fault to return.

Our diagnosis therefore includes checking the condition of associated wiring where overheating is evident.

Stove Making a Burning Smell

A temporary smell from spilled food is different from the sharp smell associated with overheated electrical insulation.

If the smell appears around the controls, wiring, isolator or rear of the stove, switch the appliance off and have it checked.

Other warning signs can include:

• Smoke

• Sparking

• Crackling sounds

• Melted plastic

• Discoloured wiring

• A hot electrical smell

• Breaker tripping

Do not continue cooking on an appliance showing signs of electrical overheating.

Stove Sparking

Visible sparking from an electric stove is not normal.

If sparking occurs around a switch, wiring connection, plate terminal or appliance cable, isolate the stove and arrange a repair.

Sparking may indicate loose wiring, insulation damage or an electrical connection that has deteriorated.

Continuing to use the stove can cause additional heat damage and turn a relatively contained fault into a more expensive repair.

Stove Not Working After a Power Interruption

Sometimes a cooking appliance stops operating after an electrical interruption or power restoration.

Before booking a repair, check whether the relevant breaker has tripped and whether other appliances on the property have power.

If the electricity supply is normal but the stove remains dead, the fault may require further diagnosis.

Electronic hobs can be particularly sensitive because they use control boards, sensors and electronic power components in addition to their heating system.

Do not repeatedly switch a breaker on when it immediately trips after the stove is energised.

Error Codes on Electronic Stoves and Hobs

Many induction and electronically controlled ceramic hobs display fault codes when the appliance detects an abnormal condition.

An error code can relate to temperature, sensors, power supply, controls, cookware detection or internal electronics depending on the manufacturer and model.

Do not assume the same code has the same meaning across different stove brands.

When booking a repair, send us:

• The exact error code

• Stove brand

• Model number

• Photograph of the control panel

• Description of what happens before the code appears

This information helps identify the appropriate diagnostic direction.

Stove and Oven Combination Repairs

Many freestanding cooking appliances combine electric stove plates with an oven in one unit.

A fault may affect only the hob, only the oven or the electrical supply shared by both.

If the stove plates work but the oven does not heat, visit our Oven & Stove Repairs Durban page for more information about oven elements, thermostats, fans and temperature-control faults.

If neither the oven nor the stove works, a shared power-supply or appliance connection may need to be investigated.

Gas Stove Problems

Gas burners require a different diagnostic and safety approach from purely electric cooking appliances.

If your problem involves:

• Gas smell

• Burner not igniting

• Weak flame

• Yellow or unstable flame

• Flame going out

• Igniter constantly clicking

• Gas valve or regulator concerns

visit our dedicated Gas Stove Repairs Durban page.

If you smell gas, stop using the appliance, avoid operating electrical switches nearby, ventilate the area where it is safe to do so and shut off the gas supply if you can do this safely.

Gas work should not be treated as ordinary DIY appliance repair.

Stove Brands We Repair in Durban

We work on many stove and cooking-appliance brands commonly found in South African homes and businesses, subject to the particular model, fault and parts availability.

These include appliances from brands such as:

• Defy

• Bosch

• Smeg

• Samsung

• AEG

• Siemens

• Whirlpool

• Hisense

• Kelvinator

• Electrolux

• Beko

• Elba

• Miele

• KIC

• LG

Brand alone does not tell us which component is fitted to the appliance.

When possible, send the model number as well. It is normally found on a manufacturer label attached to the stove, inside the lower drawer, around the door frame on combination units or on the underside of some built-in hobs.

Should You Repair or Replace Your Stove?

A faulty stove does not automatically need replacing.

Many failures involve individual components that can be repaired or replaced while the rest of the appliance remains serviceable.

Repair may make good sense where:

• The appliance is otherwise in good condition

• Only one plate or control has failed

• Suitable parts are available

• The fault is isolated and repairable

• The cost is reasonable compared with replacement

Replacement may deserve consideration where an older appliance has several major problems, extensive heat damage, badly deteriorated wiring or expensive electronic components combined with other signs of wear.

We prefer to identify the fault first so you can make the decision with useful information rather than replacing an appliance based solely on symptoms.

What You Can Check Before Booking a Stove Repair

There are a few safe observations that can help us understand the fault.

Check whether:

• Other electrical appliances have power

• The stove breaker has tripped

• One plate or all plates are affected

• The oven still works

• The fault appears on one heat setting or every setting

• An error code is displayed

• The problem began suddenly or gradually

• There was a burning smell or visible spark

• The appliance has recently been moved or installed

Do not remove panels, disconnect stove wiring or test live electrical components yourself.

A stove circuit can carry dangerous voltage and current.

What Happens During a Stove Repair Visit?

We start with the symptoms you have reported.

The technician then checks the relevant section of the appliance rather than replacing parts based purely on guesswork.

Depending on the problem, diagnosis may involve checking:

• Power supply

• Electrical connections

• Heating elements

• Solid plates

• Selector switches

• Temperature controls

• Internal wiring

• Terminal blocks

• Sensors

• Electronic controls

• Induction components

Once the likely cause has been identified, the available repair options can be discussed.

Where the correct replacement part is available and practical to fit, the repair can proceed. Some brand-specific or electronic components may need to be sourced according to the appliance model.

Residential Stove Repairs Across Durban

We repair cooking appliances in homes, flats, townhouses and rental properties throughout Durban.

Our service covers established residential areas as well as apartment-heavy and mixed residential-commercial neighbourhoods.

Whether you have a conventional Defy solid-plate stove in a family home, a built-in Bosch ceramic hob in an apartment or an induction cooktop in a modern kitchen, the diagnosis is based on the actual system and fault rather than a generic repair procedure.

For broader household appliance support, visit Durban Appliance Repairs.

Stove Repairs for Landlords and Rental Properties

A broken stove can become an urgent maintenance issue in a rental property, particularly when the appliance forms part of the property.

We assist landlords, property managers and tenants with stove fault diagnosis and repairs around Durban.

When booking for a rental property, it helps to provide:

• Tenant contact details where appropriate

• Property address

• Stove brand and model

• Description of the fault

• Whether the appliance belongs to the property

• Access arrangements

Photographs can also help identify the appliance before the visit.

Commercial Stove Repairs Durban

Cooking-appliance failures can be especially disruptive where food preparation forms part of daily business operations.

We can assess selected commercial electrical cooking appliances used by restaurants, cafés, accommodation establishments and other businesses, depending on the type of equipment involved.

Commercial appliances can differ substantially from standard domestic stoves, so provide the equipment manufacturer, model and photographs when requesting assistance.

That allows us to determine whether the particular appliance falls within the equipment we service.

Stove Repairs Near Me in Durban

If you are searching for stove repairs near me, our service covers Durban and surrounding areas.

Depending on technician availability, service coverage includes areas such as:

Durban Central and Berea: Durban CBD, Berea, Glenwood, Musgrave, Morningside, Overport, Umbilo and surrounding neighbourhoods.

Durban North: Durban North, La Lucia, Umhlanga, Phoenix, Mount Edgecombe and nearby areas.

Durban West and Upper Highway: Westville, Pinetown, Kloof, Hillcrest, Queensburgh and surrounding communities.

Durban South: Bluff, Montclair, Isipingo, Umlazi, Merebank, Amanzimtoti and surrounding areas.

For broader local appliance services, you can also visit:

• Appliance Repairs Phoenix

• Appliance Repairs Chatsworth

• Durban North Appliance Repairs

• Appliance Repairs Hillcrest

• Appliance Repairs Pinetown

• Appliance Repairs Kloof

• Appliance Repairs Westville

• Umlazi Appliance Repairs

Preparing for Your Stove Repair Appointment

Before the technician arrives, remove pots, pans and other objects from the cooking surface where possible.

Do not dismantle the stove.

If there has been sparking, electrical burning or repeated breaker tripping, leave the appliance isolated until it can be inspected.

If the stove is built into cabinetry, mention this when booking.

For induction or electronic hobs, send a photograph of any error message before switching the appliance off if it is safe to do so.

Having the brand and model number available can also make identification of replacement components easier.

Frequently Asked Questions About Stove Repairs in Durban

Why is one stove plate not heating?

A single plate may stop heating because of a failed element, plate, selector switch, loose connection or wiring problem. Testing is needed to establish which component has failed.

Why have all my stove plates stopped working?

When every plate stops working simultaneously, the fault may involve a shared power supply, wiring connection, isolator or control component rather than every heating element failing at once.

Why does my stove trip the electricity?

Electrical tripping can result from short circuits, failing heating elements, damaged wiring, moisture or insulation faults. The timing of the trip can help identify which part of the stove is affected.

Can you repair a ceramic hob?

Yes, many ceramic-hob faults can be diagnosed and repaired depending on the affected component, appliance condition and parts availability.

Can you repair an induction stove?

We can diagnose serviceable induction-hob faults. These appliances rely heavily on electronic components, so provide the brand, model and any displayed error code when booking.

Can a stove plate be replaced?

Yes, where the plate itself has failed and a suitable replacement is available. The circuit should still be tested to confirm that the plate is the actual cause.

Why does my stove plate stay on high?

A regulating switch or electronic control can fail and stop cycling the heating element correctly. The appliance should be inspected if heat can no longer be controlled normally.

Why won’t my stove switch off?

A failed control can sometimes continue supplying electricity to a heating element. Isolate the stove at its electrical supply and arrange an inspection.

Do you repair gas stoves?

Gas stove faults are handled separately because of the additional safety requirements involved. See our Gas Stove Repairs Durban service.

Do you repair ovens too?

Yes. For oven heating, thermostat, fan, element and temperature problems, visit Oven & Stove Repairs Durban.

Do you repair stove brands such as Defy, Bosch and Smeg?

We work on many major appliance brands, subject to the particular model, fault and availability of compatible replacement parts.

What information should I send when booking?

Your Durban suburb, stove brand, model number if available, whether the appliance is electric or gas, what is not working and any error code or unusual symptoms.

Book Stove Repairs in Durban

If your stove has stopped heating, one plate has failed, the controls are not responding or the appliance keeps tripping the electricity, arrange a professional diagnosis before the fault becomes more serious.

We provide stove repairs in Durban for electric stoves, solid plates, ceramic hobs, induction systems, built-in cooktops and combination cooking appliances.

Call or WhatsApp 079 976 2941 and send us your Durban location, stove brand and a brief description of the problem.

We will help determine what has failed and the most practical way to get your cooking appliance working properly again.